USING MFC REMOTE SETUP 18 - 1
18
MFC Remote Setup
The MFC Remote Setup application lets you to set up your MFC by
using the ease and speed of programming on your PC. When you
access this application, the settings on your MFC will be downloaded
to your PC and displayed on your computer screen. If you change the
settings, you can upload them directly to the MFC.
OK button
When you click OK, the process of uploading the data to the MFC
begins. The MFC Remote Setup program is closed if an error
message is displayed, enter the correct data again and then click
OK.
Cancel button
The Cancel button clears your changes and exits the MFC Remote
Setup application without uploading any data to the MFC.
Apply button
The Apply button uploads the data to the MFC, but stays in the
Remote Setup application so you can make more changes.
Using MFC Remote Setup
(For Windows
®
)
To Next Page
Loading...
Need help?
General
