5 - 4 SETUP RECEIVE
Setting Toll Saver
When you set the toll saver feature, the MFC answers after four rings
if you don’t have voice or fax messages, and after two rings if you do
have voice or fax messages. This way, when you call the MFC for
remote retrieval and let it ring three times, you know you have no
messages, and can hang up, to avoid a toll charge.
1
Press
Menu/Set
,
2
,
1
,
2
.
2
Press to select TOLL SAVER.
Press
Menu/Set
.
3
Press to select ON.
Press
Menu/Set
.
4
Press
Stop/Exit
.
When Toll Saver is ON, it overrides your Ring Delay setting. Toll
Saver must be off for the fax machine to operate using your Ring
Delay setting.
(See Setting the Ring Delay on page 5-3.)
The Toll Saver feature is available only when the TAD is set to
ON.
SETUP RECEIVE
2.RING DELAY
To Next Page
Loading...
Need help?
General
