TAD (TELEPHONE ANSWERING DEVICE) 9 - 2
Recording TAD Outgoing Message
Recording the TAD Outgoing Message (TAD MESSAGE) is the first
step you need to follow before you can turn on the TAD. Make sure
your OGM is less than 20 seconds long.
1
Press
Menu/Set
,
2
,
7
,
1
.
The LCD prompts you to choose an
OGM.
2
Press to select TAD MESSAGE
(not F/T MESSAGE).
Press
Menu/Set
.
3
Press to select RECORD MSG.
4
Press
Menu/Set
to record a message.
For example: Hello. We are unable to take your call at this time.
Please leave a message after the signal. If you wish to send a
fax, please press
5 1
, wait for fax tones, then press the Start
button.
5
Press
Stop/Exit
.
The TAD will play your OGM.
This is the only setting you can select if you want to turn on
the TAD.
SETUP TAD
1.OGM
OGM
TAD MESSAGE
To Next Page
Loading...
Need help?
General
