INITIAL SETUP 4 - 4
3
Use the dial pad to enter your name
(up to 20 characters).
Press
Menu/Set
.
(See Entering text on page 4-4.)
4
Press
Stop/Exit
.
The LCD will show the date and time.
Entering text
When you are setting certain functions, such as the Station ID, you
may need to type text into the MFC. Most number keys have three or
four letters printed below them. The keys for
0
,
#
and do not have
printed letters because they are used for special characters.
By pressing the appropriate number key repeatedly, you can access
the character you want.
Inserting spaces
To enter a space, press once between numbers and twice
between characters.
If the Station ID has already been programmed, the LCD will ask
you to press
1
to make a change or
2
to exit without changing.
Press Key one time two times three times four times
2 ABC2
3 DEF3
4 GH I 4
5 JKL5
6 MNO6
7 PQRS
8 TUV8
9 WXY Z
STATION ID
NAME:
To Next Page
Loading...
