Brother MFC-4820C - Connecting the MFC; Connecting an External Telephone

1 - 10 INTRODUCTION
Connecting the MFC
Connecting an External Telephone
Although your MFC does not have a handset, you can connect a
separate telephone (or telephone answering device) on the same
line.
Connect a separate telephone to the machine, as shown below.
Whenever this phone (or TAD) is in use, the LCD shows
TELEPHONE. To disconnect the call on the external phone and switch
to the MFC, press
Speaker Phone
.
Extension
Telephone
External
Telephone
(Example
for the U.K.)