REMOTE FAX OPTIONS 8 - 3
Setting your remote access code
The remote access code lets you access the Remote Retrieval
features when you are away from your MFC. Before you use the
remote access and retrieval features, you have to set up your own
code. The default code is inactive code (--- ).
1
Press
Menu/Set
,
2
,
5
,
3
.
2
Enter a three-digit number from
000 to 998.
Press
Menu/Set
. (The “ ” cannot be changed.)
3
Press
Stop/Exit
.
Do not use the same digits that appear in your Remote
Activation Code( 51) or Remote Deactivation Code
(
#
51).(See Operation from extension telephones on page 5-8.)
You can change your code at any time by entering a new one.
If you want to make your code inactive, press
Stop/Exit
in
Step 2 to restore the inactive setting (--- ).
REMOTE FAX OPT
3.REMOTE ACCESS
To Next Page
Loading...
Need help?
General
