AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 6
Pause
Press
Redial/Pause
to insert a 3.5-second pause between
numbers. If you are dialing overseas, you can press
Redial/Pause
as many times as needed to increase the length of the pause.
Fax Redial
If you’re sending a fax manually and the line is busy, press
Redial/Pause
to try again. Any time you want to make a second call
to the last number dialed, press
Redial/Pause
to save time.
If you’re sending a fax automatically and the line is busy, the MFC
will automatically redial three times after five minutes.
Tone or Pulse
(Except for the Nordic Countries)
If you have a Pulse dialing service, but need to send Tone signals
(for example, for telephone banking), follow the instructions below. If
you have Touch Tone service, you will not need this feature to send
tone signals.
1
Press
Speaker Phone
.
2
Press
#
on the control panel of your MFC. Any digits dialed after
this will send tone signals.
3
When you hang up, the MFC will return to the Pulse dialing
service.
To Next Page
Loading...
Need help?
General
