PRINTING REPORTS 10 - 2
Setting the Fax Activity Report Interval
You can set the MFC to print activity reports at specific intervals (every
50 faxes, 6, 12 or 24 hours, 2 or 7 days). If you set the interval to OFF,
you can print the report by following the Steps on the next page.
The default setting is OFF.
1
Press
Menu/Set
,
2
,
4
,
2
.
2
Press to choose an interval.
Press
Menu/Set
.
(If you choose 7 days, the LCD will
ask you to choose a day on which to begin the 7-day
countdown.)
3
Enter the time to begin printing in 24-hour format.
Press
Menu/Set
.
(For example: enter 19:45 for 7:45 PM.)
4
Press
Stop/Exit
.
If you select 6, 12, 24 hours, 2 or 7 days, the MFC will print the
report at the selected time and then erase all jobs from its
memory. If the MFC’s memory becomes full with 200 jobs
before the time you selected has passed, the MFC will print the
Activity Report early and then erase all jobs from memory. If you
want an extra report before it is due to print, you can print it
without erasing the jobs from memory.
REPORT SETTING
2.JOURNAL PERIOD
JOURNAL PERIOD
EVERY 50 FAXES
To Next Page
Loading...
Need help?
General
