INITIAL SETUP 4 - 8
PABX and TRANSFER
The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange
(PABX). Your fax can be connected to most types of PABX. The
recall facility on the machine supports timed break recall only (TBR),
PBXS normally can work with this for gaining access to an outside
line, or for transferring a call to another extension: The feature works
when the
Mute/R
key is pressed.
Setting PABX
If the machine is connected to a PABX system, set PBX to ON. If not,
set OFF.
1
Press
Menu/Set
,
1
,
5
.
2
Press to select ON (or OFF).
Press
Menu/Set
.
3
Press
Stop/Exit
.
You can program a
Mute/R
keypress as part of a number
stored in a Speed Dial location. When programming the Speed
dial number (Function menu 2-3-1) press
Mute/R
first (the
screen displays "!"), then enter the telephone number. If you do
this, you do not need to press
Mute/R
each time before you dial
using a Speed Dial location. (See Storing numbers for easy
dialing on page 7-1.)
However, if PBX is set to OFF, you cannot use the Speed Dial
number that a
Mute/R
keypress is programmed into.
GENERAL SETUP
5.PBX
To Next Page
Loading...
Need help?
General
