REMOTE FAX OPTIONS 8 - 5
Remote commands
Follow the commands below to access features when you are away
from the MFC. When you call the MFC and enter your Remote
Access Code (3 digits followed by ), the system will give two short
beeps and you must enter a remote command.
Remote commands Operation details
91 Playing Voice Messages After one long beep, the MFC plays the ICM.
1 Skip to back Press 1 while listening to an ICM to repeat it.
If you press 1 before a message, you will hear
the previous message.
2 Skip next While playing the ICM, you can skip to the
next message.
9 STOP Playing Stop playing the ICM.
93 Erase all ICM If you hear one long beep, the erase is
accepted. If you hear three short beeps, you
cannot erase because all voice messages
have not been played, or there is no voice
message to erase.
*This code erases all recorded messages, not
one at a time.
94 Play and Record OGM in
Memory
1 Play 1 TAD MESSAGE The MFC plays the selected OGM. You can
stop playing OGMs by pressing 9.
2 F/T MESSAGE
2 Record
1 TAD MESSAGE After one long beep, you can record the
selected OGM. You will hear the message
played once. You can stop recording the
message by pressing 9.
2 F/T MESSAGE
To Next Page
Loading...
Need help?
General
