6 - 4 SETUP SEND
6
Place the next page on the scanner
glass.
Press
Menu/Set
.
The MFC starts scanning. (Repeat Steps 5 and 6 for each
additional page.)Press
Stop/Exit
to cancel.
Out of Memory message
If you get an OUT OF MEMORY message while scanning the first page
of a fax, press
Stop/Exit
to cancel the scan. If you get an OUT OF
MEMORY message while scanning a subsequent page, you will have
the option to press
Fax Start
to send the pages scanned so far, or
to press
Stop/Exit
to cancel the operation.
Manual Transmission
Manual transmission lets you hear the dialing, ringing and
fax-receiving tones while sending a fax.
1
Place the original face down on the scanner glass.
Press
Speaker Phone
and listen for a dial tone.
2
Dial the fax number you want to call.
3
When you hear the fax tone,
press
Fax Start
.
4
Press
1
to send a fax.
If the memory is full and you are faxing a single page, it will be
sent in real time.
You cannot send multiple pages.
SET NEXT PAGE
THEN PRESS SET
1.SEND 2.RECEIVE
To Next Page
Loading...
Need help?
General
