13 - 2 USING THE MFC AS A PRINTER
Choosing the right type of paper
To get high quality printing using your MFC, it’s very important to
select the right type of paper. Be sure to read Chapter 2 Paper in this
Guide before you select and purchase paper for the MFC.
How to print your document
When the MFC receives data from your computer, it begins printing
by picking up paper from the paper tray. The paper tray can feed
many types of paper and envelopes.
1
From your computer select the Print command.
If your computer is also connected to any other printers, select
Brother MFC-4820C USB Printer as your printer driver from
the Print or Print Settings menu in your software application, and
then click on OK to begin printing.
2
Your computer sends a print command and data to the MFC.
The LCD shows RECEIVING DATA.
3
When the MFC finishes printing all the data, the LCD shows the
date and time.
If your application software does not support your custom paper size,
select the next larger paper size.
Then adjust the print area by changing the right and left margins in
your application software.
You can select the paper size, and orientation in your
application software.
To Next Page
Loading...
Need help?
General
