6 - 2 SETUP SEND
Search
You can search for names you have stored in the Speed Dial
memory. Press
Search/Speed Dial
and navigation key to search.
(See Storing Speed Dial numbers on page 7-1.)
* To seach alphabetically, you can use the dial pad to enter the first
letter of the name you are looking for.
Chain Dialing
You can store very long dialing sequences by dividing them and
setting them up as Speed Dial numbers. Then while dialing, you can
combine two or more Speed Dial numbers and even include manual
dialing using the dial pad. You can use these numbers in any
combination. The combined number will be dialed, in the order you
entered it, as soon as you press
Fax Start
.
For example:
You store “555” on Speed Dial #01 and “7000” on Speed Dial #02. If
you press
Search/Speed Dial
,
#
,
0
,
1
,
Search/Speed Dial
,
#
,
0
,
2
and
Fax Start
, you can dial “555-7000”. To temporarily change a
number, you can substitute part of the number with manual dialing
using the dial pad. So, if you press
Search/Speed Dial
,
#
,
0
,
1
and
press
7001
using the dial pad, you can dial “555-7001”.
Using access codes is easy. Sometimes you may want to choose
between several different long distance carriers when you make a
call; rates may vary depending upon the time and destination. To
take advantage of low rates, you can store the access codes or
long-distance carriers as Speed Dial numbers.
To search numerically
To search alphabetically*
To Next Page
Loading...
Need help?
General
