MAKING COPIES 11 - 3
Out of memory message
If the memory becomes full before you are
making copies, the LCD will show this
message:
If the OUT OF MEMORY message appears, press
Stop/Exit
to
cancel. You will need to clear some jobs from the memory before you
can continue.
When you get an OUT OF MEMORY message, you may be able to
make copies if you first print incoming faxes in the memory to restore
the memory to 100%.
To gain extra memory, you can erase fax and voice messages.
(See To erase messages all at once on page 9-6.)
—OR—
Print the faxes that are in the memory. (See Printing a fax from
the memory on page 5-10.)
OUT OF MEMORY
PLAIN NORMAL
To Next Page
Loading...
Need help?
General
