AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 2
Changing Speed Dial numbers
If you try to store a Speed Dial number where a number is already
stored, the LCD will show the name stored there (or number) and will
ask you to do one of the following:
1
Press
1
to change the stored
number.
—OR—
Press
2
to exit without making a change.
2
Enter a new number.
Press
Menu/Set
.
■ If you want to erase the whole number or whole name, press
Stop/Exit
when the cursor is under the first the digits or
letters. The characters above and to the right of the cursor
will be deleted.
■ If you want to change a character, use to position the
cursor under the character you want to change, and then
type over it.
3
Follow the directions beginning at Step 4 in Storing Speed Dial
numbers on the previous page.
#05:XXXXXXXX
1.CHANGE 2.QUIT
To Next Page
Loading...
