6 - 12 SETUP SEND
Checking job status
Check which jobs are still waiting in the memory to be sent. (If there
are no jobs, the LCD shows NO JOB WAITING.)
1
Press
Menu/Set
,
2
,
6
.
2
If you have more than one job
waiting, press to scroll through
the list.
3
Press
Stop/Exit
.
Cancelling a job while scanning, dialing and
sending the original
You can cancel a job while you are scanning it into memory by
pressing
Stop/Exit
. You can also cansel a job while the MFC are
dialing or sending the original by pressing
Stop/Exit
.
Cancelling a scheduled job
You can cancel a fax job that is waiting in memory.
1
Press
Menu/Set
,
2
,
6
.
Any jobs that are waiting will appear
on the LCD.
2
If you have more than two jobs waiting, press to select the
job you want to cancel.
Press
Menu/Set
.
—OR—
If you only have one job waiting, go to Step 3.
3
Press
1
to cancel.
—OR—
Press
2
to exit without cancelling.
To cancel another job go to Step 2.
4
Press
Stop/Exit
.
FAX/TEL
6.REMAINING JOBS
FAX/TEL
6.REMAINING JOBS
To Next Page
Loading...
Need help?
General
