12 - 19 WALK-UP PHOTOCAPTURE CENTER
™
5
Press to adjust the degree of White Balance.
Press
Menu/Set
.
6
Repeat Step 4 and Step 5 to adjust the degree of Sharpness
and Colour Density.
—OR—
Press
Stop/Exit
.
■ White Balance
This setting adjusts the hue of the white areas of an image.
Lighting, Camera settings and other influences will effect the
appearance of white. The white areas of a picture may be slightly
pink, yellow or some other colour. By using this adjustment you
can correct this effect and bring the white areas back to pure
white.
■ Sharpness
This setting enhances the detail of an image. It is similar to
adjusting the fine focus on a camera. If the image is not in true
focus and you cannot see the fine details of the picture, then
adjust the sharpness.
■ Colour Density
This setting adjusts the total amount of colour in the image. You
can increase or decrease the amount of colour in an image to
improve a washed out or weak picture.
To Next Page
Loading...
Need help?
General
