12 - 5 WALK-UP PHOTOCAPTURE CENTER
™
The MFC can only read one Media card at a time so do not insert
more than one card. The settings that you want to use with the card
will be kept until you take out the media card from the drive (slot),
print images or press
Stop/Exit
.
1
Insert the media card firmly into the media drive (slot).
2
When you insert your media card
into the proper slot, the LCD shows.
3
Press
Copy Options
.
The LCD scrolls:
The media active message will be shown for 60 seconds and
then the display will return to standby mode (date and time).
Even in that case, you can enter the PhotoCapture mode by
pressing
Copy Options
.
(See Printing the Index
(Thumbnails) on page 12-6.)
(See Printing images on
page 12-7.)
(See Changing the settings
for printing images on page
12-8.)
C.FLASH ACTIVE
Press CopyOptions for ----
SELECT
↑
↓
& SET
PRINT INDEX
SELECT
↑
↓
& SET
PRINT IMAGES
SELECT
↑
↓
& SET
CHANGE SETTINGS
To Next Page
Loading...
Need help?
General
