TROUBLESHOOTING AND ROUTINE MAINTENANCE 23 - 3
LOW
TEMPERATURE
The print heads are too cold. Allow the MFC to warm up.
MACHINE ERROR
XX
The MFC has a mechanical problem. Unplug the machine, and then call
Brother or your dealer for service.
MEDIA ERROR
The media card is either bad or not formatted. Reinsert the correct media card.
NEAR EMPTY
One or more of the ink cartridges are running
out of ink. If a sending machine has a colour
fax, the MFC’s ‘handshake’ will request that
the fax be sent as black and white. If the
sending machine has the ability to convert it,
the colour fax will be received into memory as
a black and white fax.
Order a new ink cartridge.
NO FILE
The media card in the media drive does not
contain a .JPG file.
Reinsert the correct media card.
NO RESPONSE/
BUSY
The number you dialed does not answer or is
busy.
Verify the number and try again.
NOT ASSIGNED
You tried to access a Speed Dial number that
is not programmed.
Set up the Speed Dial number.
(See
Storing Speed Dial numbers
on page 7-1.)
OUT OF MEMORY
The data is too large for the MFC’s memory. (See Out of memory message on
page 11-3.)
PAPER JAM
The paper is jammed in the MFC. (See Printer Jam or Paper Jam on
page 23-4.)
UNSUPPORTED
CARD
You inserted a media card that cannot be
used.
Reinsert the correct media card.
ERROR MESSAGES
ERROR
MESSAGE
CAUSE ACTION
To Next Page
Loading...
Need help?
General
