6 - 14 SETUP SEND
1
Place the original face down on the scanner glass.
2
Enter a number using Speed Dial, a Group number, Search or
the dial pad.
(Example: Group number)
3
Press
Menu/Set
. You will be asked to press the next number.
4
Enter the next number.
(Example: Speed Dial number)
5
Press
Menu/Set
.
6
Enter another fax number.
(Example: Manual dialing using the dial pad.)
7
Press
Fax Start
.
8
To send a single page,
press
2
(or press
Fax Start
again).
—OR—
To send more than one page, press
1
and go to Step 9.
9
Place the next page on the scanner
glass.
Press
Menu/Set
.
The MFC starts scanning and returns to Step 8. (Repeat Step 8
and 9 for each additional page).
NEXT PAGE?
1.YES 2.NO(DIAL)
SET NEXT PAGE
THEN PRESS SET
To Next Page
Loading...
Need help?
General
