Transmission system
1 - Drive shaft universal joint; 2-Screwdriver
6. Drain the differential oil.
7. Use a large screwdriver to pry the drive
shaft universal joint to release the split ring
fixed to the differential side universal joint
shaft.
1 - Steering knuckle; 2-Ball joint bolt; 3 - Front
suspension arm
8. Remove two lateral stabilizer mounting
brackets from the vehicle body.
9. After removing the ball joint bolt,
remove the ball joint of the front
suspension arm from the steering knuckle
by pushing down the stabilizer.
10. Remove the drive shaft assembly.
△
! Caution
To prevent damage to the dust cover, when removing the drive shaft assembly, be
careful not to contact them with other components.
To Next Page