Cessna 182 1978 - Page 84

MODEL 182 & T182 SERIES SERVICE MANUAL
CESSNA PROGRESSIVE CARE
MODEL 182 & T182
OPERATION NO. 2
Registration
No. Airplane
Model and SN Airplane
Time
INSPECTION COMPLETED BY
B 1 Fuselage Surface - Inspect for skin damage, loose rivets,
condition of paint. and check pitot-static ports and drain
holes for obstruction. Inspect covers and fairings for
security.
B 6 Emergency
Locator Transmitter
- Inspect for security of
attachment
and
check
operation
by verifying
transmitter
output. Check cumulative
time and useful life
of batteries
in accordance
with FAR Part
91.207 Refer to Section
16 -
Emergency Locator Transmitter - Checkout Interval.
B 8 Pilot's and Copilot's Inertia Reels - Inspect for security of
installation. proper operation, and evidence of damage.
B 9 Seats. Seat Belts, and Shoulder Harnesses - Check general
condition
and security. Check operation
of seat stops and
adjustment
mechanism. Inspect belts
for condition and
security of fasteners.
B 10 Windows. Windshield. Doors, and Seals - Inspect general
condition. Check latches, hinges, and seals for condition.
operaton, and security of attachment.
B 12 Flight Controls - Check freedom of movement and proper
operation
through full travel
with and without
flaps
extended. Check electric trim controls for operation (as
applicable.)
B 14 Portable
Hand Fire Extinguisher -
Inspect for proper
operating pressure, condition, security of installation, and
servicing date.
B 15 Seat Tracks and Stops - Inspect seat tracks for condition
and security of installation.
Check seat track
stops for
damage and correct
location. Ensure inspection
of seat
rails for cracks EACH 50 HOURS. Refer to Section 3.
B 17 Fuel Line
and Selector Valve Drain(s)
- Remove plug and
drain.
C 9 Elevator/Rudder Downspring - Check structure, bolts.
linkage, bellcrank. and
push-pull tube for
condition.
operation, and security. Check cables for tension, routing,
fraying, corrosion, and turnbuckle safety. Check travels if
cables
require tension adjustment
or if stops are damaged.
D 1 Brakes. Master
Cylinders, and Parking
Brake - Check
master cylinders and parking brake mechanism for
condition and security. Check fluid level and test operation
of toe and parking brake.
D 2
Main Gear Tubular Struts
- Inspect for cracks, dents,
corrosion, condition of paint or other damage. Check axles
for condition
and
security.
D 4
Wheels. Brake Discs, and
Linings - Inspect for wear.
cracks. warps, dents. or other damage. Check wheel
through-bolts and nuts for looseness
D 5 Tires - Check tread wear and general condition Check for
proper inflation
D 6 Wheel Fairings,
Strut Fairings, and
Cuffs - Check for
cracks,
dents, and condition
of paint.
D 8 Nose Gear Steering Mechanism - Check for wear. security.
and proper rigging
Revision 3 2-51