Cessna 182 1978 - Page 98

MODEL
182 & T182 SERIES
SERVICE MANUAL
CESSNA
PROGRESSIVE
CARE
MODEL
182
& T182
OPERATION
NO.
4
Registration
No. Airplane Model
and SN Airplane Time
INSPECTION COMPLETED BY
D 1
Brakes. Master
Cylinders.
and Parking
Brake - Check
master
cylinders
and parking
brake mechanism
for
condition
and security.
Check
fluid level
and test operation
of toe and parking brake.
D 2
Main Gear Tubular Struts
- Inspect for cracks, dents.
corrosion,
condition
of paint or
other damage.
Check axles
for condition and security
D
4 Wheels.
Brake Discs,
and Linings
- Inspect for
wear.
cracks,
warps, dents,
or other
damage. Check
wheel
through-bolts
and
nuts for looseness.
D
5 Tires -
Check tread wear
and general
condition.
Check for
proper inflation.
D
6 Wheel Fairings, Strut
Fairings, and Cuffs - Check
for
cracks,
dents, and condition
of paint.
D 7 Main
landing Gear Attachment
Structure - Check for
damage. cracks, loose
rivets, bolts and nuts
and security of
attachment.
D
9 Nose Gear
- Inspect torque
links, steering
rods, and
boots
for
condition and security
of attachment. Check strut
for
evidence of leakage and
proper extension.
Check strut
barrel for
corrosion, pitting, and
cleanliness. Check
shimmy
damper
and/or bungees
for operation,
leakage,
and
attach points for wear and security.
D
12 Nose Gear Attachment
Structure - Inspect for
cracks,
corrosion,
or
other damage
and security
of
attachment.
G 3 Elevator
Control System - Inspect
pulleys, cables.
sprockets, bearings,
chains, and turnbuckles
for condition.
security, and operation.
H 2 Elevator Trim System - Check cables, push-pull rods.
bellcranks. pulleys,
turnbuckles. fairleads.
rub strips, etc.
for proper
routing. condition.
and security.
H 3 Trim Controls and Indicators - Check freedom of movement
and proper operation
through full travel.
Check pulleys.
cables.
sprockets. bearings,
chains. bungees. and
turnbuckles
for condition
and security.
Check
electric trim
controls for operation
as applicable.
2 Rudder Pedals and Linkage - Check for general condition.
proper rigging,
and operation. Check
for security of
attachment.
J I Cowling
and Cowl Flaps - Inspect
for cracks, dents, and
other damage,
security of cowl
fasteners, and cowl
mounted landing lights for attachment. Check cowl flaps for
condition,
security, and
operation.
J 2
Engine - Inspect
for evidence
of oil and
fuel leaks Wash
engine and check for security of accessories
J 3 Engine,
Propeller
Controls, and
Linkage - Check
general
condition,
freedom of movement
through full range. Check
for proper travel.
security of attachment,
and for evidence
of wear
Check friction locks
for proper operation
J 4
Cowl Flap Controls
- Check
freedom of movement
through
full
travel.
J
8 Induction System
- Check
security ot clamps,
tubes,
and
ducting Inspect for evidence of leakage.
J 11 Alternate
Induction Air System - Check
for obstructions.
operation
and
security
Revision 3 2-65