Circutor CVM-B100 - Page 263

7.5.4.1.- Conguration of DHCP activation/deactivation
On this screen you select whether or not the IP is automatically assigned. Figure 184.
Figure 184: Conguration screen of the Modbus TCP (Bridge) module ( TCP Auto)
The following options appear in the lower area:
DHCP activation, the IP is automatically assigned.
DHCP deactivation, the TCP parameters are congured manually in option .
Confirm, confirms and saves in the memory the values programmed on the
screen.
Back, returns to the main conguration screen of the Modbus TCP module,
Figure 183.
Main Menu, returns to the main menu, Figure 25.
263
Instruction Manual
CVM-B100 - CVM-B150