Examples
This is an example of configuring the ppp authentication command:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# dynamic-template type ppp p1
RP/0/RSP0/CPU0:router(config-dynamic-template-type)# ppp authentication chap ms-chap pap
Related Commands
DescriptionCommand
Configures the PPP chap hostname.ppp chap, on page 381
Sets IPCP negotiation options.ppp ipcp, on page 383
Configures the lcp global configure for PPP protocol.ppp lcp, on page 385
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
380
BNG PPP Commands
ppp authentication (BNG)
To Next Page
Loading...
Need help?
General
