num_send_drop_bpi_msg = 0
num_send_drop_spi_msg = 0
num_recv_drop_bpi_msg = 0
num_recv_drop_spi_msg = 0
num_sent_bpi_msg = 0
num_sent_spi_msg = 0
num_recv_bpi_msg = 0
num_recv_spi_msg = 0
num_sent_pulse = 0
SPI AIPC Information:
conn_present = 0
tx_attempt_count = 0
tx_count = 0
rx_count = 0
notify_connect_count = 0
notify_queue_high_count = 0
notify_queue_low_count = 0
notify_queue_full_count = 0
notify_data_waiting_count = 0
notify_error_count = 0
notify_close_count = 0
notify_sendstatus_count = 0
notify_open_count = 0
pulse_data_waiting_count = 0
queue_full = 0
queue_full_drop = 0
outstanding_buffers = 0
overflow_queue_size = 0
cumulative_overflow_msgs = 0
hwm_overflow_msgs = 0
BPI AIPC Information:
conn_present = 1
tx_attempt_count = 0
tx_count = 0
rx_count = 1
notify_connect_count = 0
notify_queue_high_count = 0
notify_queue_low_count = 0
notify_data_waiting_count = 1
notify_error_count = 0
notify_close_count = 0
notify_sendstatus_count = 0
notify_open_count = 1
queue_full = 0
queue_full_drop = 0
outstanding_buffers = 0
overflow_queue_size = 0
cumulative_overflow_msgs = 0
hwm_overflow_msgs = 0
Feature Information (number of entries = 3):
---------------------------------------------------
***Feature Name*** = RSI
Connection ID = 0x1
Session type = SUBDB_SESSION_LABEL_TYPE_IP_SUB_INBAND
Activate Required = FALSE
Config Set ID = 1
Registration Handle = 0x1
whichevent[0] = SUBDB_CB_EVENT_NONE
whichevent[1] = SUBDB_CB_EVENT_ALL
Feature State = SUBDB_FEATURE_REGISTERED
***Feature Name*** = RSI
Connection ID = 0x1
Session type = SUBDB_SESSION_LABEL_TYPE_PPPOE_SUB
Activate Required = FALSE
Config Set ID = 1
Registration Handle = 0x2
whichevent[0] = SUBDB_CB_EVENT_NONE
whichevent[1] = SUBDB_CB_EVENT_ALL
Feature State = SUBDB_FEATURE_REGISTERED
***Feature Name*** = RSI
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
542
Subscriber Commands
show subscriber database
To Next Page
Loading...
Need help?
General
