Connection ID = 0x1
Session type = SUBDB_SESSION_LABEL_TYPE_IP_SUB_DHCP
Activate Required = FALSE
Config Set ID = 1
Registration Handle = 0x3
whichevent[0] = SUBDB_CB_EVENT_NONE
whichevent[1] = SUBDB_CB_EVENT_ALL
Feature State = SUBDB_FEATURE_REGISTERED
Client Connection Identifier: 0x2
=====================================
ref_count = 2
req_count = 0
bpi_reg_count = 0
spi_reconciled = TRUE
bpi_reconciled = TRUE
client_restarted = FALSE
client_name = iedge SVM
timer_running = FALSE
spi_cb_info:
SUBDB_SPI_CB_PROD_ALL_DONE = SUBDB_CB_EVENT_NONE
SUBDB_SPI_CB_SESSION_PROD_DONE = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_SESSION_ACTIVATED = SUBDB_CB_EVENT_NONE
SUBDB_SPI_CB_SESSION_CREATED = SUBDB_CB_EVENT_NONE
SUBDB_SPI_CB_SESSION_DESTROYED = SUBDB_CB_EVENT_NONE
SUBDB_SPI_CB_SESSION_ASSOCIATED = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_SESSION_UNASSOCIATED = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_SESSION_CONFIG_CHANGED = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_TEMPLATE_INSTALLED = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_TEMPLATE_UNINSTALLED = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_OBJECT_AGEOUT = SUBDB_CB_EVENT_ALL
Persistent Information:
in_use = TRUE
forced_full_resync = FALSE
client_flags = TMPL_PROD, SESS_PROD
state = SUBDB_CLIENT_FULL
instance_no = 1
num_bpi_regs = 0
num_send_drop_bpi_msg = 0
num_send_drop_spi_msg = 0
num_recv_drop_bpi_msg = 0
num_recv_drop_spi_msg = 0
num_sent_bpi_msg = 0
num_sent_spi_msg = 0
num_recv_bpi_msg = 0
num_recv_spi_msg = 1
num_sent_pulse = 0
SPI AIPC Information:
conn_present = 1
tx_attempt_count = 0
tx_count = 0
rx_count = 2
notify_connect_count = 0
notify_queue_high_count = 0
notify_queue_low_count = 0
notify_queue_full_count = 0
notify_data_waiting_count = 2
notify_error_count = 0
notify_close_count = 0
notify_sendstatus_count = 0
notify_open_count = 1
pulse_data_waiting_count = 0
queue_full = 0
queue_full_drop = 0
outstanding_buffers = 0
overflow_queue_size = 0
cumulative_overflow_msgs = 0
hwm_overflow_msgs = 0
BPI AIPC Information:
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
543
Subscriber Commands
show subscriber database
To Next Page
Loading...
Need help?
General
