Cisco A9K-SIP-700 Command Reference

Task ID
OperationTask ID
readnetwork
readconfig-services
Examples
These are some of the options for the show subscriber session command in the EXEC mode:
RP/0/RSP0/CPU0:router# show subscriber session all
RP/0/RSP0/CPU0:router# show subscriber session all summary location 0/1/CPU0
RP/0/RSP0/CPU0:router# show subscriber session filter vrf vrf1 location 0/1/CPU0
RP/0/RSP0/CPU0:router# show subscriber session subscriber-label 40
This is the sample output of the show subscriber session all command:
Wed Jan 23 10:20:58.344 GMT
Codes: IN - Initialize, CN - Connecting, CD - Connected, AC - Activated,
ID - Idle, DN - Disconnecting, ED - End
Type Interface State Subscriber IP Addr / Prefix
LNS Address (Vrf)
--------------------------------------------------------------------------------
PPPoE:PTA Gi0/1/0/0.pppoe1 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.pppoe2 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.pppoe3 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.1.pppoe1 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.1.pppoe2 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.1.pppoe3 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.2.pppoe1 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.2.pppoe2 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.2.pppoe3 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.3.pppoe1 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.3.pppoe2 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.3.pppoe3 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.pppoe4 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.pppoe5 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.pppoe6 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.1.pppoe4 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.1.pppoe5 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.1.pppoe6 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.2.pppoe4 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.2.pppoe5 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.2.pppoe6 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.3.pppoe4 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.3.pppoe5 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.3.pppoe6 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.pppoe7 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.pppoe8 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.pppoe9 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.1.pppoe7 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.1.pppoe8 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.1.pppoe9 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.2.pppoe7 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.2.pppoe8 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.2.pppoe9 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.3.pppoe7 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.3.pppoe8 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.3.pppoe9 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.pppoe10 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.pppoe11 AC 100.0.0.1 (default)
PPPoE:PTA Gi0/1/0/0.pppoe12 AC 100.0.0.1 (default)
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
567
Subscriber Commands
show subscriber session

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English