Cisco ASR 920 series Configuration Guide Ethernet Router

PurposeCommand or Action
Binds the service instance to a bridge- domain instance
where bridge-id is the identifier for the bridge- domain
instance.
bridge-domain bridge-id
Example:
Device(config-if-srv)# bridge-domain 200
Step 6
Adds the specified MAC address as a permit MAC address
for the service instance.
mac security address permit mac-address
Example:
Device(config-if-srv)# mac security address
permit a2aa.aaaa.aaaa
Step 7
Adds the specified MAC address as a permitted MAC
address for the service instance.
mac security address permit mac-address
Example:
Device(config-if-srv)# mac security address
permit a2aa.aaaa.aaab
Step 8
Adds the specified MAC address as a permitted MAC
address for the service instance.
mac security address permit mac-address
Example:
Device(config-if-srv)# mac security address
permit a2aa.aaaa.aaac
Step 9
Adds the specified MAC address as a permitted MAC
address for the service instance.
mac security address permit mac-address
Example:
Device(config-if-srv)# mac security address
permit a2aa.aaaa.aaad
Step 10
Adds the specified MAC address as a permitted MAC
address for the service instance.
mac security address permit mac-address
Example:
Device(config-if-srv)# mac security address
permit a2aa.aaaa.aaae
Step 11
Enables MAC security on the service instance.mac security
Example:
Device(config-if-srv)# mac security
Step 12
Returns to user EXEC mode.end
Example:
Device(config-if-srv)# end
Step 13
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
95
Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
Configuring a MAC Address Permit List

Cisco ASR 920 series Specifications

General

Form Factor	1RU
Operating System	Cisco IOS XE
Model	ASR 920 series
Memory	4 GB DRAM
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
MTBF	Varies by model
Management	CLI, SNMP