Cisco ASR 920 series

Verifying Egress TCAM Details
The show platform hardware pp active feature qos tcam eqos 0 all command displays and verifies the
egress TCAM details.
#show platform hardware pp active feature qos tcam eqos 0 all
FIELD 0: total 125, used 60, min 125, first_entry 0, hole:0, size:0
=========================================================================
FIELD 1: total 0, used 0, min 0, first_entry 125, hole:0, size:0
=========================================================================
FIELD 2: total 799, used 0, min 0, first_entry 125, hole:0, size:0
=========================================================================
FIELD 3: total 50, used 0, min 50, first_entry 924, hole:0, size:0
=========================================================================
index 0: 1 contiguous entries in same hw_handle, aclType EGRESSCLASSIFY,lookupTable NA
index 1: 1 contiguous entries in same hw_handle, aclType EGRESSCLASSIFY,lookupTable NA
index 2: 1 contiguous entries in same hw_handle, aclType EGRESSCLASSIFY,lookupTable NA
index 3: 1 contiguous entries in same hw_handle, aclType EGRESSCLASSIFY,lookupTable NA
index 4: 1 contiguous entries in same hw_handle, aclType EGRESSCLASSIFY,lookupTable NA
Verifying TCAM Index Details
The show platform hardware pp active feature qos tree service-instance <num> port-number <num>
input tcam-info command displays the TCAM index details pertaining to the specified interface.
Tcam-handle=2253
First-Index=184
Last-Index=249
Total-Count=66
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
80
VLAN Translation with QoS
Verifying Egress TCAM Details