Cisco ASR 920 series

SUMMARY STEPS
1.
enable
2.
show ethernet lmi {{evc [detail evc-id [interface type number] | map interface type number]} |
{parameters | statistics} interface type number | uni map [interface type number]}
3.
show ethernet service evc [detail | id evc-id [detail] | interface type number [detail]]
4.
show ethernet service instance [detail | id id | interface type number | policy-map | stats]
5.
show ethernet service interface [type number] [detail]
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Displays information that was sent to the customer
edge (CE).
show ethernet lmi {{evc [detail evc-id [interface type number]
| map interface type number]} | {parameters | statistics}
interface type number | uni map [interface type number]}
Step 2
Example:
Device# show ethernet lmi evc
Displays information about all Ethernet virtual
circuits (EVCs) or about a specified EVC.
show ethernet service evc [detail | id evc-id [detail] | interface
type number [detail]]
Example:
Device# show ethernet service evc
Step 3
Displays information about customer service
instances.
show ethernet service instance [detail | id id | interface type
number | policy-map | stats]
Example:
Device# show ethernet service instance detail
Step 4
Displays interface-only information about Ethernet
customer service instances for all interfaces or for a
specified interface.
show ethernet service interface [type number] [detail]
Example:
Device# show ethernet service interface ethernet 1/3
detail
Step 5
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
295
Configuring Ethernet Local Management Interface at a Provider Edge
Displaying Ethernet LMI and OAM Manager Information