Cisco ASR 920 series

PurposeCommand or Action
Returns to user EXEC mode.end
Example:
Device# end
Step 3
Clearing All Dynamically Learned MAC Addresses on a Bridge Domain
Perform this task to clear all dynamically learned MAC addresses on a bridge domain.
SUMMARY STEPS
1.
enable
2.
clear bridge-domain bridge-id mac table
3.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Clears all dynamically learned MAC addresses on the
specified bridge domain.
clear bridge-domain bridge-id mac table
Example:
Device# clear bridge-domain 100 mac table
Step 2
Returns to user EXEC mode.end
Example:
Device# end
Step 3
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
114
Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
Clearing All Dynamically Learned MAC Addresses on a Bridge Domain