Cisco ASR 920 series Configuration Guide Ethernet Router

Displaying the Service Instances with MAC Security Enabled on a Specific
Bridge Domain
Perform this task to display the service instances on a specific bridge domain that have MAC security enabled.
SUMMARY STEPS
1.
enable
2.
show bridge-domain id mac security
3.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Displays all the service instances with MAC security
enabled on a specific bridge domain.
show bridge-domain id mac security
Example:
Device# show bridge-domain 100 mac security
Step 2
Returns to user EXEC mode.end
Example:
Device# end
Step 3
Showing the MAC Addresses of All Secured Service Instances
SUMMARY STEPS
1.
enable
2.
show ethernet service instance mac security address
3.
end
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
108
Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
Displaying the Service Instances with MAC Security Enabled on a Specific Bridge Domain

Cisco ASR 920 series Specifications

General

Form Factor	1RU
Operating System	Cisco IOS XE
Model	ASR 920 series
Memory	4 GB DRAM
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
MTBF	Varies by model
Management	CLI, SNMP