Configuration Examples for Configuring ITU-T Y.1731
Performance Monitoring Functions
Example: Configuring Performance Monitoring
For Y.1731 performance monitoring configuration examples, see "Configuring IP SLAs Metro-Ethernet 3.0
ITU-T Y.1731 Operations" in the IP SLAs Configuration Guide.
Feature Information for ITU-T Y.1731 Performance Monitoring
in a Service Provider Network
The following table provides release information about the feature or features described in this module. This
table lists only the software release that introduced support for a given feature in a given software release
train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 16: Feature Information for ITU-T Y.1731 Performance Monitoring in a Service Provider Network
Feature InformationReleasesFeature Name
ITU-T Y.1731 performance
monitoring provides
standard-based Ethernet
performance monitoring that
encompasses the measurement of
Ethernet frame delay, frame-delay
variation, and throughput as
outlined in the ITU-T Y.1731
specification and interpreted by the
Metro Ethernet Forum (MEF). This
feature was implemented on Cisco
ASR 900 Series Aggregation
Services Routers.
Cisco IOS XE Release 3.7SITU-T Y.1731 Performance
Monitoring in a Service Provider
Network
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
325
ITU-T Y.1731 Performance Monitoring in a Service Provider Network
Configuration Examples for Configuring ITU-T Y.1731 Performance Monitoring Functions
To Next Page
Loading...
Need help?
General
