Cisco ASR 920 series

DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Defines a CFM maintenance domain at a particular
level and enters Ethernet CFM configuration mode.
ethernet cfm domain domain-name level level-id
direction outward
Example:
Device(config)# ethernet cfm domain CUSTOMER level
7 direction outward
Step 3
Sets a universally unique ID for a CSI within a
maintenance domain.
service csi-id evc evc-name
Example:
Device(config-ether-cfm)# service customer_100 evc
evc_100
Step 4
Returns to global configuration mode.exit
Example:
Device(config-ether-cfm)# exit
Step 5
Defines a CFM maintenance domain at a particular
level and enters Ethernet CFM configuration mode.
ethernet cfm domain domain-name level level-id
Example:
Device(config)# ethernet cfm domain MIP level 7
Step 6
Returns to global configuration mode.exit
Example:
Device(config-ether-cfm)# exit
Step 7
Defines a CFM maintenance domain at a particular
level and enters Ethernet CFM configuration mode.
ethernet cfm domain domain-name level level-id
Example:
Device(config)# ethernet cfm domain PROVIDER level
4
Step 8
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
198
Configuring Ethernet Connectivity Fault Management in a Service Provider Network
Configuring Ethernet CFM