SolutionProblem
In a scale scenario, you configure either the console
logging rate-limiting using logging rate-limit or using
logging buffered instead of using logging console.
The suggested rate-limit is around 30 messages per
second.
ethernet cfm logging
Additional References
Related Documents
Document TitleRelated Topic
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/
mcl/allreleasemcl/all-book.html
Cisco IOS commands
Standards and RFCs
TitleStandard/RFC
—
No specific Standards and RFCs are supported by the
features in this document.
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs
—
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
230
CFM Configuration over EFP Interface with Cross Connect Feature
Additional References