Cisco ASR 920 series Configuration Guide Ethernet Router

Technical Assistance
LinkDescription
http://www.cisco.com/cisco/web/support/index.html
The Cisco Support and Documentation website
provides online resources to download documentation,
software, and tools. Use these resources to install and
configure the software and to troubleshoot and resolve
technical issues with Cisco products and technologies.
Access to most tools on the Cisco Support and
Documentation website requires a Cisco.com user ID
and password.
Feature Information for Link Layer Discovery Protocol in
Multivendor Networks
The following table provides release information about the feature or features described in this module. This
table lists only the software release that introduced support for a given feature in a given software release
train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 17: Feature Information for Link Layer Discovery Protocol in Multivendor Networks
Feature InformationReleasesFeature Name
This feature was introduced on the
Cisco ASR 920 Series Aggregation
Services Router
(ASR-920-12CZ-A,
ASR-920-12CZ-D,
ASR-920-4SZ-A,
ASR-920-4SZ-D).
Cisco IOS XE Release 3.13.0SLink Layer Discovery Protocol in
Multivendor Networks
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
347
Using Link Layer Discovery Protocol in Multivendor Networks
Feature Information for Link Layer Discovery Protocol in Multivendor Networks

Cisco ASR 920 series Specifications

General

Form Factor	1RU
Operating System	Cisco IOS XE
Model	ASR 920 series
Memory	4 GB DRAM
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
MTBF	Varies by model
Management	CLI, SNMP