Cisco ASR 920 series Configuration Guide Ethernet Router

PurposeCommand or Action
Displays information about the last violation recorded on
each of the service instances that belong to the bridge
domain.
show bridge-domain bridge-id mac security last
violation
Example:
Device# show bridge-domain 100 mac security
last violation
Step 2
Returns to user EXEC mode.end
Example:
Device# end
Step 3
Clearing All Dynamically Learned MAC Addresses on a Service Instance
Perform this task to clear all dynamically learned MAC addresses on a service instance.
SUMMARY STEPS
1.
enable
2.
clear ethernet service instance id id interface type number mac table
3.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Clears all the dynamically learned MAC addresses on
the specified service instance.
clear ethernet service instance id id interface type
number mac table
Example:
Device# clear ethernet service instance id 100
interface gigabitethernet0/0/1 mac table
Step 2
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
113
Configuring MAC Address Limiting on Service Instances Bridge Domains and EVC Port Channels
Clearing All Dynamically Learned MAC Addresses on a Service Instance

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English