Cisco ASR 920 series Configuration Guide Ethernet Router

NNI ActionS-UNI ActionC-UNI ActionProtocolMAC Address
PeerPeerPeerPort Aggregation
Protocol (PagP),
UniDirectional Link
Detection (UDLD),
01-00-0C-CC-CC-CC
DataDataPeerCisco Discovery
Protocol (CDP),
VLAN Trunk
Protocol (VTP)
NANANADynamic Trunking
Protocol (DTP)
DataDataPeerPer-VLAN
Spanning Tree
(PVST)
01-00-0C-CC-CC-CD
How to Configure 802.1ad
Configuring the IEEE 802.1ad on Service Instances
Note
•
Only encapsulation default command is supported on S-UNI ports
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface interface-id
4.
ethernet dot1ad {nni | uni {c-port | s-port}}
5.
service instance number ethernet [name]
6.
encapsulation {default | dot1q | priority-tagged | untagged}
7.
bridge-domain bridge-id [split-horizon group group-id]
8.
rewrite ingress tag { pop {1 | 2} symmetric | push dot1ad vlan-id [dot1q vlan-id] symmetric}
9.
end
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
409
Configuring IEEE 802.1ad
How to Configure 802.1ad

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English