Cisco ASR 920 series

PurposeCommand or Action
Enables SNMP trap generation for Ethernet CFM
continuity check events in relation to the cross-check
snmp-server enable traps ethernet cfm crosscheck
[mep-unknown] [mep-missing] [service-up]
Step 12
operation between statically configured MEPs and those
learned via CCMs.
Example:
Device(config)# snmp-server enable traps ethernet
cfm crosscheck mep-unknown
Returns the device to privileged EXEC mode.end
Example:
Device(config)# end
Step 13
Provisioning the Network (CE-B)
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ethernet cfm domain domain-name level level-id [direction outward]
4.
mep archive-hold-time minutes
5.
exit
6.
ethernet cfm global
7.
ethernet cfm ieee
8.
ethernet cfm traceroute cache
9.
ethernet cfm traceroute cache size entries
10.
ethernet cfm traceroute cache hold-time minutes
11.
snmp-server enable traps ethernet cfm cc [mep-up] [mep-down] [config] [loop] [cross-connect]
12.
snmp-server enable traps ethernet cfm crosscheck [mep-unknown] [mep-missing] [service-up]
13.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
258
Configuring Ethernet CFM
Configuring Ethernet CFM