Cisco ASR 920 series Configuration Guide Ethernet Router

PurposeCommand or Action
Binds a service instance to a bridge domain instance.
bridge-domain domain-number
Step 7
Returns to privileged EXEC mode.end
Step 8
Configuring policy for ingress QoS
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
class-map match-all cos value
4.
match cos value
5.
policy-map policy-name
6.
class class-name
7.
set cos cos value
8.
police cir value
9.
interface interface-number
10.
no ip address
11.
load-interval seconds
12.
service instance id ethernet evc-id
13.
encapsulation dot1q vlan-id second-dot1q vlan-id
14.
rewrite ingress tag translate 2-to-1 dot1q vlan-id symmetric
15.
service-policy input policy-map-name
16.
bridge-domain domain-number
17.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Step 2
Determine how packets are evaluated when the packets meet all of the
match criteria.
class-map match-all cos value
Step 3
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
76
VLAN Translation with QoS
Configuring policy for ingress QoS

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English