Cisco ASR 920 series

Configuring Ethernet CFM
Provisioning the Network (CE-A)
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
ethernet cfm domain domain-name level level-id
4.
mep archive-hold-time minutes
5.
exit
6.
ethernet cfm global
7.
ethernet cfm ieee
8.
ethernet cfm traceroute cache
9.
ethernet cfm traceroute cache size entries
10.
ethernet cfm traceroute cache hold-time minutes
11.
(Optional) snmp-server enable traps ethernet cfm cc [mep-up] [mep-down] [config] [loop]
[cross-connect]
12.
snmp-server enable traps ethernet cfm crosscheck [mep-unknown] [mep-missing] [service-up]
13.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Defines a CFM maintenance domain at a particular
maintenance level and enters Ethernet CFM configuration
mode.
ethernet cfm domain domain-name level level-id
Example:
Device(config)# ethernet cfm domain Customer
level 7
Step 3
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
256
Configuring Ethernet CFM
Configuring Ethernet CFM