Cisco ASR 920 series Configuration Guide Ethernet Router

CHAPTER 3
EVC Local Connect
Local connect (Layer 2 point to point service) is a point to point connection. It transparently transmits packet
between two service instances which are configured on the same box. Local connect only connects two end
points (service instances). This is different from the traditional L2 bridging.
Packet is not forwarded based on MAC addresses.Note
•
Finding Feature Information, page 51
•
Information About EVC Local Connect, page 52
•
Prerequisites for EVC Local Connect, page 52
•
Restrictions for EVC Local Connect, page 52
•
How to Configure EVC Local Connect, page 53
•
Configuration Examples, page 55
•
Use Cases or Deployment Scenarios, page 56
•
Additional References for EVC Local Connect, page 57
•
Feature Information for EVC Local Connect, page 58
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
51

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English