Cisco ASR 920 series Configuration Guide Ethernet Router

SUMMARY STEPS
1.
enable
2.
configure terminal
3.
lldp run
4.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Enables LLDP globally.
To disable LLDP globally, use the no lldp run
command.
Note
lldp run
Example:
Device(config)# lldp run
Step 3
Returns to privileged EXEC mode.end
Example:
Device(config)# end
Step 4
Disabling LLDP Globally
Perform this task to disable LLDP globally.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
no lldp run
4.
end
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
333
Using Link Layer Discovery Protocol in Multivendor Networks
Enabling and Disabling LLDP Globally

Cisco ASR 920 series Specifications

General

Brand	Cisco
Model	ASR 920 series
Category	Network Router
Language	English