Cisco ASR 920 series Configuration Guide Ethernet Router

Troubleshooting CFM Features 229
Additional References 230
Feature Information for CFM Configuration over EFP Interface with Cross Connect
Feature 231
CHAPTER 10 G.8032 and CFM Support for Microwave Adaptive Bandwidth 233
Finding Feature Information 233
Prerequisites for G.8032 and CFM Microwave Adaptive Bandwidth Support 234
About G.8032 and CFM Support for Microwave Adaptive Bandwidth 234
Microwave Adaptive Bandwidth Feature Functionality 234
Fixed Versus Adaptive Bandwidth Modulation and the Microwave Adaptive Bandwidth
Feature 234
Adaptive Bandwidth Multi-hop Extensions 235
How to Configure G.8032 and CFM Support for Microwave Adaptive Bandwidth 237
Creating the Ethernet Microwave Event and Using G.8032 to Specify Appropriate
Actions 237
Modifying Ethernet Microwave Event Settings 239
Configuration Examples for G.8032 and CFM Support for Microwave Adaptive
Bandwidth 241
Example: Configuring the Ethernet Microwave Event 241
Example: Verifying the Ethernet Microwave Event Configuration 241
Example: Signal Degraded Event Syslog Messages 243
Example: Configuring the TRUNK EFP with ACM Microwave 243
Additional References for G.8032 and CFM Support for Microwave Adaptive Bandwidth 244
Feature Information for G.8032 and CFM Support for Microwave Adaptive Bandwidth 245
CHAPTER 11 Configuring Ethernet CFM 247
Finding Feature Information 247
Prerequisites for Configuring Ethernet CFM 247
Information About Configuring Ethernet CFM 248
Ethernet CFM 248
Benefits of Ethernet CFM 248
Maintenance Associations 248
Maintenance Domains 249
Maintenance Points 250
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
xii
Contents

Cisco ASR 920 series Specifications

General

Form Factor	1RU
Operating System	Cisco IOS XE
Model	ASR 920 series
Memory	4 GB DRAM
Power Supply	AC or DC
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Relative Humidity	5% to 95% non-condensing
MTBF	Varies by model
Management	CLI, SNMP