Cisco Catalyst 3560-X User Manual

1-10
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Chapter 1 Configuring Cisco IOS Configuration Engine
Configuring Cisco IOS Agents
Step 7
discover {controller controller-type | dlci
[subinterface subinterface-number] | interface
[interface-type] | line line-type}
Specify the interface parameters in the CNS connect
profile.
• For controller controller-type, enter the controller
type.
• For dlci, enter the active data-link connection
identifiers (DLCIs).
(Optional) For subinterface subinterface-number,
specify the point-to-point subinterface number that is
used to search for active DLCIs.
• For interface [interface-type], enter the type of
interface.
• For line line-type, enter the line type.
Step 8
template name [ ... name] Specify the list of CNS connect templates in the CNS
connect profile to be applied to the switch configuration.
You can specify more than one template.
Step 9
Repeat Steps 7 to 8 to specify more interface parameters
and CNS connect templates in the CNS connect profile.
Step 10
exit Return to global configuration mode.
Step 11
hostname name Enter the hostname for the switch.
Step 12
ip route network-number (Optional) Establish a static route to the Configuration
Engine whose IP address is network-number.
Command Purpose

Cisco Catalyst 3560-X Specifications

General

Enclosure Type	Rack-mountable - 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 4 x SFP
Flash Memory	64 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Device Type	Switch
Performance	Switching capacity: 128 Gbps
Jumbo Frame Support	Yes
Routing Protocol	RIP-1, RIP-2, EIGRP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Features	DHCP support, VLAN support, QoS, IPv6 support, Syslog
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at
Stacking	Stackable
Security Features	SSH, RADIUS, TACACS+
Management	CLI
Dimensions (H x W x D)	17.5 in
Operating Temperature	32 to 113 °F (0 to 45 °C)
Humidity	10 - 95% (non-condensing)