Cisco Catalyst 3560-X

1-18
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
Chapter 1 Implementing IPv6 Multicast
Implementing IPv6 Multicast
Enabling MLD Proxy in IPv6
Beginning in privileged EXEC mode, follow these steps:
Resetting Authorization Status on an MLD Interface
If no interface is specified, authorization is reset on all MLD interfaces.
Beginning in privileged EXEC mode, follow these steps:
Command Purpose
Step 1
configure terminal Enter global configuration mode.
Step 2
ipv6 mld host-proxy [group-acl]
Example:
Switch(config)# ipv6 mld host-proxy
proxy-group
Enables the MLD proxy feature.
Step 3
ipv6 mld host-proxy interface [group-acl]
Example:
Switch(config)# ipv6 mld host-proxy
interface Ethernet 0/0
Enables the MLD proxy feature on a specified interface on an
RP.
Step 4
show ipv6 mld host-proxy [interface-type
interface-number] group [group-address]]
Example:
Switch(config)# show ipv6 mld host-proxy
Ethernet0/0
Displays IPv6 MLD host proxy information.
Step 5
copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Step 1
clear ipv6 multicast aaa authorization
[interface-type interface-number]
Example:
Switch# clear ipv6 multicast aaa
authorization FastEthernet 1/0
Clears parameters that restrict user access to an IPv6 multicast
network.
Step 2
copy running-config startup-config (Optional) Save your entries in the configuration file.