Cisco Catalyst 3560-X User Manual

Index
IN-11
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
destination-MAC address forwarding, EtherChannel 1-9
detecting indirect link failures, STP 1-8
device discovery protocol 1-1
device manager
benefits
1-2
described 1-3, 1-6
in-band management 1-8
device sensor
configuring
1-54
DHCP
Cisco IOS server database
configuring
1-14
default configuration 1-9
described 1-6
DHCP for IPv6
See DHCPv6
enabling
relay agent
1-11
server 1-10
DHCP-based autoconfiguration
client request message exchange
1-4
configuring
client side
1-4
DNS 1-8
relay device 1-8
server side 1-7
server-side 1-10
TFTP server 1-7
example 1-10
lease options
for IP address information
1-7
for receiving the configuration file 1-7
overview 1-3
relationship to BOOTP 1-4
relay support 1-7, 1-17
support for 1-7
DHCP-based autoconfiguration and image update
configuring
1-11 to 1-14
understanding 1-5 to 1-6
DHCP binding database
See DHCP snooping binding database
DHCP binding table
See DHCP snooping binding database
DHCP object tracking, configuring primary interface
1-11
DHCP option 82
circuit ID suboption
1-5
configuration guidelines 1-9
default configuration 1-8
displaying 1-16
forwarding address, specifying 1-11
helper address 1-11
overview 1-3
packet format, suboption
circuit ID
1-5
remote ID 1-5
remote ID suboption 1-5
DHCP server port-based address allocation
configuration guidelines
1-27
default configuration 1-27
described 1-26
displaying 1-29, 1-12
enabling 1-27
reserved addresses 1-28
DHCP snooping
accepting untrusted packets form edge switch
1-3,
1-13
and private VLANs 1-14
binding database
See DHCP snooping binding database
configuration guidelines
1-9
default configuration 1-8
message exchange process 1-4
option 82 data insertion 1-3
trusted interface 1-2
untrusted interface 1-2
untrusted messages 1-2
DHCP snooping binding database
adding bindings
1-15

Cisco Catalyst 3560-X Specifications

General

Enclosure Type	Rack-mountable - 1U
Subtype	Gigabit Ethernet
Ports	48 x 10/100/1000 + 4 x SFP
Flash Memory	64 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Device Type	Switch
Performance	Switching capacity: 128 Gbps
Jumbo Frame Support	Yes
Routing Protocol	RIP-1, RIP-2, EIGRP
Remote Management Protocol	SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTP, HTTPS
Features	DHCP support, VLAN support, QoS, IPv6 support, Syslog
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad, IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ag, IEEE 802.3at
Stacking	Stackable
Security Features	SSH, RADIUS, TACACS+
Management	CLI
Dimensions (H x W x D)	17.5 in
Operating Temperature	32 to 113 °F (0 to 45 °C)
Humidity	10 - 95% (non-condensing)