Index
IN-21
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
monitoring 1-51
naming 1-39
physical, identifying 1-20
range of 1-22
restarting 1-53, 1-54
shutting down 1-53
speed and duplex, configuring 1-32
status 1-51
supported 1-20
types of 1-1
interfaces range macro command 1-24
interface types 1-20
Interior Gateway Protocol
See IGP
internal BGP
See IBGP
internal neighbors, BGP
1-50
internal power supplies
See power supplies
Internet Control Message Protocol
See ICMP
Internet Group Management Protocol
See IGMP
Internet Protocol version 6
See IPv6
Inter-Switch Link
See ISL
inter-VLAN routing
1-16, 1-2
Intrusion Detection System
See IDS appliances
inventory management TLV
1-3
IP ACLs
for QoS classification
1-7
implicit deny 1-11, 1-15
implicit masks 1-11
named 1-16
undefined 1-23
IP addresses
128-bit
1-2
candidate or member 1-4, 1-13
classes of 1-7
cluster access 1-2
command switch 1-3, 1-11, 1-13
default configuration 1-6
discovering 1-24
for IP routing 1-6
IPv6 1-2
MAC address association 1-10
monitoring 1-19
redundant clusters 1-11
standby command switch 1-11, 1-13
See also IP information
IP base feature set
1-1, 1-2
IP base software image 1-1
IP broadcast address 1-17
ip cef distributed command 1-92
IP directed broadcasts 1-15
ip igmp profile command 1-25
IP information
assigned
manually
1-15
through DHCP-based autoconfiguration 1-3
default configuration 1-3
IP multicast routing
addresses
all-hosts
1-3
all-multicast-routers 1-3
host group address range 1-3
administratively-scoped boundaries, described 1-47
and IGMP snooping 1-2
Auto-RP
adding to an existing sparse-mode cloud
1-26
benefits of 1-26
configuration guidelines 1-12
filtering incoming RP announcement
messages
1-28
overview 1-7
preventing candidate RP spoofing 1-28
To Next Page
Loading...
