Cisco Catalyst 3560-X - Page 1534

Index
IN-54
Catalyst 3750-X and 3560-X Switch Software Configuration Guide
OL-25303-03
using RCP 1-19
using TFTP 1-13
image files
preparing
1-28, 1-31, 1-36
reasons for 1-25
using FTP 1-34
using RCP 1-38
using TFTP 1-30
USB flash devices 1-18
USB inactivity timer 1-17
USB port
mini-type B
1-16
USB ports 1-16
USB Type A port 1-8
USB type A port 1-18
User Datagram Protocol
See UDP
username-based authentication
1-6
Using Memory Consistency Check Routines 1-26
V
VACLs
logging
configuration example
1-40
version-dependent transparent mode 1-5
version-mismatch (VM) mode
automatic upgrades with auto-upgrade
1-12
described 1-12
displaying 1-12
manual upgrades with auto-advise 1-13
upgrades with auto-extract 1-13
virtual IP address
cluster standby group
1-11
command switch 1-11
virtual ports, MKA 1-3
Virtual Private Network
See VPN
virtual router
1-1, 1-2
virtual switches and PAgP 1-6
vlan.dat file 1-4
VLAN 1
disabling on a trunk port
1-20
minimization 1-19
VLAN ACLs
See VLAN maps
vlan-assignment response, VMPS
1-26
VLAN blocking, REP 1-12
VLAN configuration
at bootup
1-7
saving 1-7
VLAN database
and startup configuration file
1-7
and VTP 1-1
VLAN configuration saved in 1-6
VLANs saved in 1-4
vlan dot1q tag native command 1-5
VLAN filtering and SPAN 1-8
vlan global configuration command 1-6
VLAN ID, discovering 1-24
VLAN link state 1-6
VLAN load balancing
REP
1-4
VLAN load balancing, triggering 1-5
VLAN load balancing on flex links
configuration guidelines
1-8
described 1-2
VLAN management domain 1-2
VLAN Management Policy Server
See VMPS
VLAN map entries, order of
1-33
VLAN maps
applying
1-36
common uses for 1-36
configuration guidelines 1-33
configuring 1-32
creating 1-34
defined 1-3